istat banner
iStat

The VetScan i-STAT 1® delivers accurate blood gas, electrolyte, chemistry and hematology results in minutes from 2-3 drops of whole blood in a completely portable, handheld package - making it the ideal solution for critical care situations, hospital operating room monitoring, exotic animals and research needs at the point of care.
Most importantly, the VetScan i-STAT 1® provides the additional information needed to monitor chronic disease patients, evaluate pre-anesthetic patients and provide diagnostic specialty testing information for the ill patient in the exam or treatment room.

Acid-base, blood gas, electrolyte, chemistry, and hematology testing with one platform

Saves counter space and money while improving in-house testing capability

Small sample size - 95 µL or less

Provides the ability to test small or ill animals such as an anemic puppy or the fractious cat

Speed: most results in 2 minutes

Obtain results, diagnose, discuss with clients and begin treatment immediately at the point-of-care

Accurate and reliable

Offers peace of mind to make quick and confident patient assessment

Comprehensive internal quality control

Ensures reliable results; removes the need and cost of external controls

Low maintenance

Save costs and time

show all features and benefits

Cartridge Test Menu

The VetScan i-STAT1 uses a wide range of disposable single-use cartridges that contain the necessary reagents to provide reference lab quality results while improving efficiency throughout the animal health continuum of care.

i-STAT CG4+

CG4

Provides the following 8 parameters

pH PCO² HCO³ tCO² Base-Excess PO² sO² Lactate

i-STAT G

istate G

Provides the following 1 parameters

GLU

i-STAT CG8+

CG8+

Provides the following 13 parameters

Hct Hgb iCa GLU Na K pH PCO2 HCO3 tCO2 Base Excess PO2 sO2

i-STAT Crea

Crea

Provides the following 1 parameters

Crea

i-STAT E3+

E3

Provides the following 5 parameters

Hct Hgb Cl Na K

i-STAT 6+

6+

Provides the following 7 parameters

Hct Hgb BUN GLU Cl Na K

i-STAT EC8+

ec8

Provides the following 11 parameters

Hct Hgb BUN Crea iCa GLU Cl Na K tCO2 Anion Gap

i-STAT ACT Celite

ACT

Provides the following 1 parameters

ACT

i-STAT Cardiac Troponin

CTnl

Provides the following 1 parameters

cTnl

i-STAT Chem8+

Chem8

Provides the following 11 parameters

Hct Hgb BUN Crea iCa GLU Cl Na K tCO2 Anion Gap

VetScan i-STAT 1 Handheld Analyzer Demonstration

 

Watch this video to find out more details about VetScan i-STAT 1® and see the product in action.

Simple Operation

A full range of diagnostic applications in the palm of your hand, in 3 easy steps.

istat step1

Fill cartridge to fill line

istat step2

Insert cartridge

istat step3

Read results in 2 minutes

IStat Wireframe
  • Height:

    23.48 cm (9.245 in)
  • Width:

    7.68 cm (3.035 in)
  • Depth:

    7.24 cm (2.85 in)

Specifications

Weight

650 grams (22.9 oz) with rechargeable batteries 635 grams (22.4 oz) with disposable batteries

Power

Two 9-volt lithium batteries or rechargeable battery

Calibration

Factory: electronic, mechanical, thermal, pressure

Memory/Clock Backup Power

Lithium battery

Display

Dot matrix supertwist liquid crystal

Communication Link

Infrared light-emitting diode (LED)

Operating Temperature

16 - 30 °C (61 - 86 °F) for VetScan i-STAT cartridge testing

Transport Temperature

-10 - 46 °C (14 - 115 °F)

Relative Humidity

90% (maximum) non-condensing

Barometric Pressure

300 - 1000 mmHg

Laser Scanner

Complies with U.S. 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser Notice No. 50, dated July 26, 2001. EN 60825-1:1994 + A1:2002 + A2:2001 IEC 60825-1:1993 + A1:1997 + A2:2001

What technology does the VetScan i-STAT 1® utilize?

Electrochemistry. Measurement is accomplished using electrochemical sensing technologies. A group of thin film electrodes located at the top of a cartridge are coated with chemically sensitive films. These coated sensors react to small changes caused by chemical reactions in the sample. The sensors are either potentiometric, measuring changes in the electric potential, amperometric, measuring changes in electric current, or conductometric measuring changes in conductivity. The concentration of the analyte is determined by measuring the difference in signal from the calibrant and the sample. This difference in signal is then converted to the specific concentration units for the analyte using the analyzer's internal processor.

What kinds of tests can be run on the VetScan i-STAT 1® instrument?

The VetScan i-STAT1 offers a variety of disposable, single-use cartridges (10) including tests for acid/base analysis, blood gases, chemistry, hematology, electrolytes, and some specialty tests like Lactate, ACT, and Cardiac Troponin I. These cartridges are configured with parameters that can give a clear patient's condition depending on the clinical situation.

What type of sample is used?

Whole blood.

What is the shelf-life of the VetScan i-STAT1 cartridges?

The cartridges are manufactured with 5-11 months shelf life, depending on the stability of the analytes in each cartridge.

What species does the VetScan i-STAT1 have reference ranges for?

Cat, dog, and horse. These ranges are available in the user guide provided with the analyzer.
+ Show more questions

Schedule a Demonstration

Contact with an Abaxis Representative to get information about all products and services

Find Out More About Abaxis

Contact us to learn more about Abaxis products and what we can do for your practice.

Every issue includes spotlight articles devoted to issues of particular interest to veterinarians, upcoming conferences, VetScan news, and much more!